HomeText SearchStructure Searche-Chemicals.comList Your CompanyContactAccountLogoff






























Troy Corporation




Country: USA

8 Vreeland Road
Florham Park, NJ 07932 USA


Phone: (973) 443-4200
FAX: (973) 443-0843
E-Mail:E-Mail this Supplier


http://www.troycorp.com/

Click the play button below for a video of Troy Corporation

Company Profile

Troy Corporation is a global leader in the manufacture of performance biocides, additives, and specialty chemicals. Since inception in 1950, Troy has been at the forefront of technology and product innovation. Our dedication to providing the latest technology with improved environmental performance continues to distinguish Troy. Troy also offers a full line of FDA-approved performance products for use in applications that come in contact with foodstuffs.

Industries including paint and coatings, adhesives, sealants, and preservatives have long recognized Troy for superior quality and performance – in products as well as service. Troy has expanded steadily since inception, with annual growth rates exceeding industry averages over the past decade.

Troy Corporation is headquartered in the United States, with principal subsidiaries in Canada, Europe, and Asia and sales offices located throughout the world.

With strategically located manufacturing, research and development, and technical support facilities, Troy is well positioned to accommodate expanding customer needs worldwide.


Product List: 181

PON:Page:


 


Dry-Film Preservatives

POLYPHASE® 2085
Polyphase 2085 is a broad-spectrum fungicide effective against a wide variety of fungal organisms (staining and mildew). It is developed to provide enhanced efficiency in solvent-based formulations. Polyphase 2085 offers excellent dry film fungal protection in interior and exterior coatings and wood protective stains. Polyphase 2085 also provides e
POLYPHASE® 588
Polyphase 588 is a clear liquid, synergistic fungicide/algaecide that provides dry film protection for aqueous and solvent-based coatings. It is used to treat roof and stucco/masonry coatings, EIFS coatings, concrete admixtures, and other similar coating products. Polyphase 588 should be added at the final stage of production.
POLYPHASE® 600
Polyphase 600 is a clear liquid, synergistic fungicide/algaecide that provides dry film protection for aqueous and solvent-based coatings. It is used to treat paints and coatings, stucco/masonry coatings, EIFS coatings, and other similar coating products. Polyphase 600 should be added at the final stage of production.
POLYPHASE® 604
Polyphase 604 is a transparent, water-dispersible liquid, non-metallic preservative for control of fungi and yeast in water-based adhesives (glues), paints, water and tempera colors, inks, pigment slurries, clays, and photographic emulsions. Polyphase 604 is an effective wet-stage and dry film preservative with exceptional thermal stability.
POLYPHASE® 641
Polyphase 641 is a clear liquid, non-metallic fungicide/mildewcide that provides dry film protection for solvent-based and most aqueous-based systems. It has excellent chemical stability in clear and pigmented alkyd and solvent systems. Polyphase 641 is used to treat paints and coatings, stucco/masonry coatings, EIFS coatings, and other similar coa
POLYPHASE® 662
Polyphase 662 is a zero VOC, water-dispersed fungicide/algaecide that provides dry film protection for aqueous-based material. It is used to treat paints and coatings, stucco/masonry coatings, EIFS coatings, and other similar coating products in which water is a major component. Polyphase 662 should be added at the final stage of production.
POLYPHASE® 663
Polyphase 663 is a zero VOC, water-dispersed fungicide/algaecide that provides dry film protection for aqueous-based material. It is used to treat paints and coatings, stucco/masonry coatings, EIFS coatings, and other similar coating products in which water is a major component. Polyphase 663 also offers enhanced protection against algae.
POLYPHASE® 678
Polyphase 678 is a zero VOC, water-dispersed fungicide/mildewcide that provides dry film protection for aqueous-based material. It is used to treat paints and coatings, stucco/masonry coatings, EIFS coatings, and other similar coating products in which water is a major component. Polyphase 678 should be added at the final stage of production.
POLYPHASE® AF1
Polyphase AF1 is a fungicide/mildewcide that provides dry film protection for solvent-based and most aqueous-based systems. It is used to treat paints and coatings, stucco/masonry coatings, EIFS coatings, and other similar coating products. Polyphase AF1 should be added at the final stage of production.
POLYPHASE® AF3
Polyphase AF3 is a broad-spectrum, non-metallic fungicide solution effective against a wide variety of fungal organisms. It may be used to protect both interior and exterior products from the growth of fungal organisms on the end-use product. It is suited for waterborne and solvent-based applications.
POLYPHASE® CST1
Polyphase CST1 is a water-dispersible liquid fungicide/mildewcide that provides dry film protection for aqueous-based and most solvent-based material. It is used to treat paints and coatings, stucco/masonry coatings, EIFS coatings, and other similar coating products. Polyphase CST1 should be added at the final stage of production.
POLYPHASE® EC17
Polyphase EC17 is an emulsifiable concentrate, liquid preservative for the control of yeast and fungi in aqueous- and solvent-based adhesives, antifoams, dyestuffs, print paste, spinning lubricant emulsions, polymer and latex coatings, thickeners, fabric softeners, and other textile wet processing chemicals.
POLYPHASE® LTP
Polyphase LTP is a water-dispersible liquid preservative for preventing mildew and rot in the dry film of aqueous- and solvent-based adhesives, polymer coatings, and SBR latex emulsions for carpet backing. Polyphase LTP also provides protection against mildew and rot of fabrics such as army duck, awnings, canvas, footwear, and more.
POLYPHASE® P100
Polyphase P100 is an off-white crystalline solid, non-phenol fungicide/mildewcide effective against a wide variety of fungal organisms. Polyphase P100 is used to prevent the growth of fungi and mildew in press cakes and fiber and yarn lubricants. Polyphase P100 also provides protection against mildew and rot.
POLYPHASE® P20T
Polyphase P20T is a water-dispersible liquid fungicide/mildewcide that provides dry film protection for aqueous-based and most solvent-based systems. It is used to treat paints and coatings, stucco/masonry coatings, EIFS coatings, and other similar coating products. Polyphase P20T should be added at the final stage of production.
POLYPHASE® PW40
Polyphase PW40 is effective against a wide variety of fungal organisms (mold, staining, and mildew). The primary application is in water-based products, especially those in which VOC is a major concern. Polyphase PW40 is a free-flowing, VOC-free dispersion.
POLYPHASE® SA27
Polyphase SA27 is a zero VOC, water-dispersed fungicide/mildewcide that provides dry film protection for aqueous-based material. It is used to treat water-based adhesives, sealants, and caulks, and is especially well-suited for difficult environments, such as kitchens, bathrooms, basements, and exterior applications.
POLYPHASE® WD17
Polyphase WD17 is a water-dispersible liquid preservative for the control of yeast and fungi in adhesives, antifoams, dyestuffs, print paste, spinning lubricant emulsions, polymer and latex coatings, thickeners, fabric softeners, and other textile wet processing chemicals.
TROYSAN® CP20
Troysan CP20 is a zero VOC, broad-spectrum powdered fungicide effective against a wide variety of fungal organisms. Troysan CP20 may be used as a fungicide for joint cement compounds, caulks, cements, sealants, plastics, and coatings.
TROYSAN® S90
A systemized approach to dry-film protection, Troysan S90 imparts a full spectrum of biological control, including protection from common species of fungi and algae that cause unsightly marring and shorten the life of exterior applied caulks and sealants. Troysan S90 is VOC-free and color stable.


Wet-State Preservatives

MERGAL® 174II
Mergal 174II is a water-soluble liquid preservative for the control of bacteria in aqueous coatings. For use in resin emulsions, pigment slurries, paints, stucco/masonry, EIFS, and other aqueous coating products. Can be used to control bacterial growth at the air-water interface of paint manufacturing equipment and to recover spoiled material.
MERGAL® 174P
MERGAL 174P is a free-flowing, water-soluble powder preservative for the control of bacteria in adhesives, antifoams, dyestuffs, print paste, spinning lubricant emulsions, polymer and latex coatings, thickeners, fabric softeners, and other textile wet processing chemicals. MERGAL 174P is intended for use in aqueous products up to 125°F (52°C).
MERGAL® 186
MERGAL 186 is a clear, non-yellowing, water-soluble liquid preservative for control of bacteria in aqueous coatings. For use in resin emulsions, pigment slurries, waterborne paints, stucco/masonry coatings, EIFS coatings, and other coating products in which water is a component. Provides broad color stability.
MERGAL® 192
MERGAL 192 is a liquid, water-soluble organic preservative designed for use in aqueous based coatings. For use in resin emulsions, pigment slurries, waterborne paints, stucco/masonry coatings, EIFS coatings, and other coating products in which water is a component.
MERGAL® 395
MERGAL 395 is a clear, water-soluble liquid preservative for the control of bacteria. For use in resin emulsions, pigment slurries, waterborne paints, stucco/masonry coatings, EIFS coatings, and other coating products in which water is a component. Can be added at any point in the manufacturing process. Highly stable at elevated processing temperat
MERGAL® 399
MERGAL 399 is a zero VOC, clear, water-based, non-freezing liquid preservative for the control of bacteria. For use in resin emulsions, pigment slurries, waterborne paints, stucco/masonry coatings, EIFS coatings, and other coating products in which water is a component. Can be added at any point in the manufacturing process.
MERGAL® 530
Mergal 530 is a low VOC, CH2O-free sanitizing biocide used to quickly regain control of contaminated product and microbiologically fouled tanks, lines, and surfaces. It is approved for use in paints, adhesives, construction materials, and process waters, among others. Mergal 530 is the only formaldehyde-free quick kill biocide capable of restor
MERGAL® 680
MERGAL 680 is a water-soluble, liquid preservative for the control of bacteria, yeast, and fungi in adhesives, antifoams, dyestuffs, print paste, polymer and latex coatings, thickeners, fabric softeners, and other textile wet processing chemicals. MERGAL 680 is especially effective in controlling Pseudomonas sp. and Bacillus sp.
MERGAL® 753
Mergal 753 is a highly concentrated, free-flowing wet-state preservative that is particularly useful for applications in which a non-alkaline, formaldehyde-free product is desired. Mergal 753 is recommended for paints, coatings, stuccos, adhesives, joint cements, mineral and pigment slurries, starch solutions, and sealants.
MERGAL® 758
Mergal 758 is a VOC-free, formaldehyde-free preservative developed for today's wet-state systems that encounter sporadic contaminations. Mergal 758 is comprised of a quick kill biocide active for regaining control of the system, as well as a biostat to ensure long-term protection. Mergal 758 is approved for use in paints, adhesives, constructio
MERGAL® BIT20
MERGAL BIT20 is a liquid, water-soluble preservative designed for use in aqueous products. It is cleared under a wide range of FDA sections. When used at suggested levels in these systems, MERGAL BIT20 is cost-effective, offers long-lasting efficacy and ease of incorporation, and has broad-spectrum antimicrobial activity.
MERGAL® BIT20W
MERGAL BIT20W is a broad-spectrum wet-state preservative provided in a VOC-free, stable dispersion. BIT20W inhibits the growth of bacteria, yeast, & fungi in aqueous formulations.
MERGAL® BIT20X
MERGAL BIT20X is a broad-spectrum, liquid wet-state preservative that provides long-term protection against bacteria & fungi in aqueous formulations emulsions, lattices, adhesives, and more.
MERGAL® K10N
MERGAL K10N is a VOC-free, clear, water-based liquid that is free of glycols, surfactants, and metals, and is intended for the preservation of adhesives, antifoams, dyestuffs, print pastes, polymer and latex coatings, thickeners, fabric softeners, and other wet processing chemicals. MERGAL K10N complies with FDA Title 21 CFR175.105, 176.170, 176.18
MERGAL® K12N
MERGAL K12N is a fast-acting, water-soluble liquid preservative for the control of bacteria, yeast, and fungi in adhesives, antifoams, dyestuffs, print paste, polymer and latex coatings, thickeners, fabric softeners, and other wet processing chemicals. MERGAL K12N complies with FDA Title 21 CFR 175.105 and 176.170.
MERGAL® K14
MERGAL K14 is a fast-acting, water-soluble liquid preservative for the control of bacteria, yeast, and fungi. For use in resin emulsions, pigment slurries, waterborne paints, and other coating products in which water is a component. Especially suited for coatings containing some residual redox agents.


DISPERSANTS/ SURFACTANTS

TROYSOL ™ LAC
Troysol™ LAC promotes superior wetting for aqueous and water-reducible inks applied to low energy surfaces. Low concentrations reduce the coating surface tension, resulting in improved adhesion, excellent flow and leveling, and the elimination of surface defects. Troysol LAC in flexo inks promotes excellent wetting of foils and plastic films.
TROYSOL™ 367
Troysol S367 promotes the wetting of contaminated surfaces such as metal and low surface energy substrates such as PET, Mylar™ , polyethylene and polypropylene. It improves surface appearance by promoting surface flow to eliminate crawling and pinholes. Troysol S367 is the wetting additive of choice for alkyl phenol ethoxylate-free coatings.
TROYSOL™ 380W
Troysol 380W promotes excellent wetting for water reducible coatings applied to contaminated or low energy surfaces. Coating properties including adhesion, flow and leveling, surface appearance and color acceptance are improved with the use of Troysol 380W. It is easily incorporated for production batch adjusTMent.
TROYSOL™ AFP
Troysol AFP is a surface active additive used to reduce pigment flooding and pigment floating in non-aqueous coatings. This insures a color that is uniform (no floating) and the correct (no flooding) for the dry coating. Troysol AFP stabilizes the surface tension forces during the drying process.
TROYSOL™ MS2
Troysol MS2 is an additive for increasing slip at the coating surface while maintaining excellent recoatability. The increase of slip improves the resistance properties, such as mar and abrasion. The tendency for blocking is minimized and surface leveling improves. Troysol MS2 is effective in non-aqueous and water-reducible coating systems.
TROYSPERSE 90W
Troysperse 90W is a dispersing additive used for universal color pigment mill bases to tint both aqueous and non-aqueous formulations. Troysperse 90W provides optimum color development for a variety of difficult-to-disperse pigments, such as carbon black, phthalocyanines, and other organic pigments, combining the best color and the highest gloss.
TROYSPERSE™ 200SF
Troysperse 200SF is an amphoteric, long-chain dispersing additive for difficult-to-disperse pigments, such as carbon black, phthalocyanines, and other organic pigments. Troysperse 200SF is solvent-free, enabling the formulator to comply with changing environmental regulations. Troysperse 200SF, with its low use levels, provides excellent cost-in-us
TROYSPERSE™ 98C
Troysperse 98C is an amphoteric, long-chain dispersing additive for difficult-to-disperse pigments such as carbon black, phthalocyanines, and other organic pigments. Troysperse 98C is 95% active. The high level of activity provides the necessary dispersion performance without burdening the formulator with higher solvent concentrations.
TROYSPERSE™ CD1
Troysperse CD1 is an alkyd-based, general-purpose dispersing additive for titanium dioxide and inorganic pigments. It can be used with carbon black and organic pigments where maximum color strength and transparency are not critical. It allows the ink formulator to achieve high pigment concentrations, stable dispersions, and fast dispersion times.
TROYSPERSE™ SD100
Troysperse SD100 is a modified alkyd-based general purpose dispersing additive. It is used for dispersion of titanium dioxide and iron-oxide pigments in non-aqueous formulations. It allows the coating formulator to achieve higher pigment concentrations and faster dispersion times, while providing excellent color acceptance, high gloss and less pigm
TROYSPERSE™ W
Troysperse W is an amphoteric, fatty-amine-based dispersing additive for difficult-to-disperse pigments, such as carbon black, phthalocyanines, and other organic pigments. It is also very effective in providing improved clarity in semi-transparent, iron-oxide coatings. It is an excellent dispersing additive for making aqueous color concentrates.


RHEOLOGY MODIFIERS

TROYTHIX™ 150ACS
The strong thixotropic properties of Troythix 150ACS result in increased resistance to pigment settling while providing the necessary balance between sag resistance and flow & leveling required for high gloss coatings. It is suitable for industrial high gloss coatings including automotive, metal decorating, maintenance, wood, and furniture
TROYTHIX™ 152H
TROYTHIX™ 152H is a pre-activated polyamide wax dispersion that effectively provides high thixotropy, excellent sag resistance, and pigment suspension in wood and furniture finishes, metallic and special effect pigmented coatings, high gloss industrial coatings, automotive coatings, and more.
TROYTHIX™ 154B
TROYTHIX™ 154B is a pre-activated polyamide wax dispersion that effectively provides high thixotropy, excellent sag resistance, and pigment suspension in non-aqueous systems.
TROYTHIX™ 156P
TROYTHIX™ 156P is a 100% active, micronized powder amide wax rheology modifier effective in a wide range of non-aqueous high solids and solvent-free systems.
TROYTHIX™ 21BA
Troythix 21BA increases viscosity by providing controlled flocculation of pigment particles. It is effective in pigmented coatings containing oxidizing resins and aliphatic solvents. Troythix 21BA imparts a high degree of thixotropy, resulting in reduced sag and pigment settling.
TROYTHIX™ 250XF
Troythix 250XF is an aromatic-free, pre-activated polyamide wax dispersion that provides improved pigment suspension, sag resistance, and application properties in solvent-based systems.
TROYTHIX™ 42BA
Troythix 42BA, the rheology additive for batch correction, increases viscosity without changing the viscosity profile. It is effective in clear and lightly pigmented systems with aliphatic and aromatic solvents. Troythix 42BA increases viscosity with minimal effect on gloss and no adverse effect on color uniformity.
TROYTHIX™ 704SSA
Troythix 704SSA increases resistance to pigment settling without increasing the application viscosity. It is particularly beneficial for industrial applications, including primers, dip coatings, stains, and other low gloss systems. Troythix 704SSA is effective in most non-aqueous, solvent-free, and water-reducible coatings.
TROYTHIX™ 707SSA
Troythix 707SSA increases resistance to pigment settling in high gloss coatings without increasing application viscosity. It is effective in industrial coatings, including automotive finishes, dipping enamels, coil coatings, and aerosols. Troythix 707SSA has no negative effects on coating properties.
TROYTHIX™ A
Troythix A, a chemically-modified castor ester, is activated by temperature and shear energy. It imparts a highly thixotropic viscosity, thereby improving resistance to sag and settling, improving application properties, and reducing substrate penetration.
TROYTHIX™ ANTISAG 4
Troythix Anti-Sag 4, a sulfonated castor, prevents pigment agglomeration and pigment settling without increasing viscosity. It is easily incorporated, and can be post-added to increase sag resistance. Troythix™ Anti-Sag 4 reduces substrate penetration, pigment floating, and does not affect gloss.
TROYTHIX™ XYZ


POWDER COATING ADDITIVES

POWDERMATE® 486CFL
Flow & Leveling for Clear Coatings - Powdermate 486CFL allows the production of crystal clear topcoats free of surface defects. Powdermate 486CFL offers excellent flow and leveling combined with good intercoat properties and resistance to yellowing. The product can be formulated with all currently available commercial resin systems.
POWDERMATE® 507PFL
Flow & Leveling for Pigmented Coatings - Powdermate 507PFL ensures whiter whites and deep rich colors in high gloss pigmented coatings. It provides superior intercoat performance in primer systems and high distinctness-of-image and excellent gloss retention for brilliant color coats. It can be formulated with all currently available commercial resi
POWDERMATE® 508TEX
Texturing/Special Effects - Powdermate 508TEX creates a wide variety of textures and special effects. No other single texture additive can offer the flexibility of Powdermate 508TEX. This product can be formulated with all currently available commercial resin systems.
POWDERMATE® 520PWS
Substrate & Pigment Wetting - Powdermate 520PWS is a pigment and substrate wetting additive engineered to improve flow and adhesion properties on direct-to-metal applications, as well as increase pigment wetting for improved dispersion. This product can be formulated with all currently available commercial resin systems.
POWDERMATE® 542DG
High Performance Degassing Agent - Powdermate 542DG is designed to eliminate surface defects caused by entrapped gasses and provide excellent protection against discoloration from overbake, gas-fired curing, outdoor exposure, and Hydroxyalkylamide (HAA) systems. This product can be formulated with all currently available commercial resin systems.
POWDERMATE® 550DG
High Performance Degassing Agent - Powdermate 550DG is designed to eliminate surface defects caused by entrapped gasses and provides excellent protection against discoloration. This product is suitable for a wide range of applications such as appliance, architectural, and general industrial, and can be formulated with all currently available commer
POWDERMATE® 570FL
Flow, Leveling, & Intercoat Adhesion - Powdermate 570FL is an advanced flow and leveling additive engineered to eliminate surface defects and enhance clarity, gloss, and intercoat adhesion. This product can be formulated with all currently available commercial resin systems.
POWDERMATE® 575FL
Flow, Leveling, & Intercoat Adhesion - Powdermate 575FL is an advanced flow and leveling additive engineered to eliminate surface defects and enhance clarity, gloss, and intercoat adhesion while providing improved surface smoothness. This product can be formulated with all currently available commercial resin systems.


DEFOAMERS

TROYKYD® D01
Troykyd D01 is a hydrophobic silica-based defoamer. Its versatility provides rapid air release in the grind and letdown phases of flat to semi-gloss architectural coatings. This product provides fast bubble break during roller and spray applications. Troykyd D01 has excellent long-term persistence.
TROYKYD® D11
Troykyd D11 is especially effective for adhesive products applied in industrial applications. In curtain coating applications, its silicone free composition does not adversely affect curtain integrity. It is also effective in pressure sensitive adhesives and consumer emulsion type adhesives.
TROYKYD® D121
Troykyd D121 is a high-efficiency, free-flowing powder defoamer for use in cement-based, gypsum-based, and various other dry mix systems.
TROYKYD® D209W
Troykyd D209W is a solvent-free, high-performance additive that eliminates foam without compromising surface appearance or integrity in high gloss aqueous coatings.
TROYKYD® D230
Troykyd D230 is a strong silicone-based antifoam. It prevents air entrapment during pigment grind, and is not adversely affected by prolonged manufacturing time. Troykyd D230 is extremely effective for color pigment concentrates.
TROYKYD® D336
The active ingredient of Troykyd D336 is based upon a synthetic wax, which is dispersed in a hydrocarbon carrier system. For concentrate and tankside applications, Troykyd D336 is also recommended for aqueous cleaning formulations.
TROYKYD® D472
The active ingredient of Troykyd D472 is based upon a synthetic wax, which is dispersed in a hydrocarbon carrier system. For concentrate and tankside applications, Troykyd D472 is also recommended for aqueous cleaning formulations.
TROYKYD® D704
Troykyd D704 is a hydrophobic, silica-based defoamer that is effective in both grind and letdown applications. This product is effective in a broad range of architectural coatings, including flat, low gloss, eggshell, and semi-gloss systems. Troykyd D704 provides superior long-term persistence.
TROYKYD® D720
Troykyd D720 is a general purpose defoamer. This product is particularly effective in flat to low gloss architectural coatings. Troykyd D720 is water-dispersible for ease of incorporation. It is added in the letdown phase, and will not adversely affect color acceptance.
TROYKYD® D726
Troykyd D726 is a robust defoamer containing multi-hydrophobes. It provides long-term defoaming efficacy in flat to gloss architectural coatings. Troykyd D726 can often be used as a single defoaming material in systems in which multiple defoamers have been required previously for adequate defoaming function.
TROYKYD® D727
Troykyd D727 is extremely effective in high-foaming aqueous systems. It is excellent for gravure ink applications and high speed laminations. This product may also be added press side for improved performance. Troykyd D727 is silicone-free and water-dispersible for ease of incorporation.
TROYKYD® D729
Troykyd D729 is a very effective silicone-based antifoam additive for preventing air entrainment during pigment grinding or other process applications. Troykyd D729 is effective for the full range of aqueous coating types and can be used in flat to high gloss products. It can be used alone or in combination with a letdown defoamer such as Troykyd D
TROYKYD® D742
Troykyd D742 is a non-ionic air release additive (defoamer) for aqueous systems. D742 provides excellent bubble-breaking and air release performance in aqueous wood coatings, industrial enamels, high gloss decorative coatings, and overprint varnishes.
TROYKYD® D745
Troykyd D745 is an air release additive that provides efficient bubble-breaking and air release performance in high shear applications, such as overprint varnishes, inks, adhesives, and wood coatings. D745 eliminate microfoam for excellent film appearance.
TROYKYD® D777
Troykyd D777 is a silicone-modified antifoam/defoamer that is effective in viscous coating systems. Troykyd D777 does not adversely affect color acceptance properties.
TROYSOL™ 307
Troysol 307 is a silicone copolymer that eliminates air entrainment in reactive systems, such as epoxy and urethanes. It provides improved surface flow and eliminates common defects, such as fisheyes and orange peel. Troysol 307 is very effective in high-solids coating systems. Low use levels result in low cost-in-use performance for the coatings m
TROYSOL™ AFL
Troysol AFL is a mixture of polymeric materials. It provides superior air release when used in industrial coating applications, such as wood finishing, furniture finishing, automotive, coil coating, and metal decorating. Troysol AFL eliminates air entrainment in polyester gel coats.


WETTING AGENTS

TROYSOL ™ ZLAC
Troysol ZLAC provides the same benefits and attributes long associated with Troysol LAC, but without the VOC. The product is particularly effective in wetting low energy and contaminated surfaces, without causing undesired fisheyes and other problems. Troysol ZLAC eliminates surface defects, improves adhesion, gloss, flow and leveling and color acc
TROYSOL™ 382
Troysol 382 is a multifunctional, silicone-free wetting additive that provides improved substrate wetting, system flow & leveling, defoaming, gloss, and color uniformity in aqueous coatings, inks, adhesives, construction products, and emulsion polymers.
TROYSOL™ S366
Troysol S366 promotes the wetting of contaminated surfaces such as metal and difficult-to-wet surfaces such as plastic. It improves surface appearance by promoting surface flow to eliminate craters and fisheyes. Typical applications include aerospace, automotive, coil, heavy equipment, metal decorating, and transportation.
TROYSOL™ S367
Troysol S367 promotes the wetting of contaminated surfaces, such as metal and low surface energy substrates, including PET, Mylar™, polyethylene, and polypropylene. It improves surface appearance by promoting surface flow to eliminate crawling and pinholes. Troysol S367 is the wetting additive of choice for alkyl phenol ethoxylate-free coating
TROYSOL™ Z370
Troysol Z370 is a zero VOC, APE-free, high performance substrate wetting and mar & slip additive for solvent, water-reducible, and aqueous systems. Troysol Z370 improves the wetting of low surface energy and contaminated substrates, resulting in uniform film coverage and the prevention of surface defects, such as craters, pinholes, and orange peel.
TROYSOL™ Z372
Troysol Z372 is a universal wetting and mar & slip additive for solvent, water-reducible, and aqueous systems. Z372 improves resistance properties, gloss, and film appearance.
TROYSOL™ Z377
Troysol™ Z377 is a silicone-free acrylic additive that improves the flow and leveling of non-aqueous systems. Troysol Z377 is highly effective in enhancing surface smoothness and stabilizing surface tension gradients upon application and during cure. These characteristics prevent the formation of surface defects, such as craters, pinholes, and


Carboxylates from Synthetic Acids

TROYMAXTM BARIUM 12.5
Barium carboxylates improve through-drying of a coating and have good pigment wetting characteristics. They also demonstrate lower water sensitivity than Calcium carboxylates.
TROYMAXTM BISMUTH 24
Bismuth is used as a substitute for lead. It strongly activates cobalt and improves through-drying properties and drying under adverse weather conditions (like Calcium does). Bismuth carboxylates are used in baking finishes to improve the hardness.
TROYMAXTM CALCIUM 10NA
Calcium carboxylates are very useful when used in combination with active driers such as Cobalt and Manganese. Calcium driers help to improve hardness and gloss as well as to reduce skin-formation, silking, and blooming. They are also useful as pigment wetting/dispersing agents and loss-of-dry inhibitors.
TROYMAXTM CALCIUM 4NA
TROYMAXTM CALCIUM 5NA
TROYMAXTM CALCIUM 6NA
TROYMAXTM CALCIUM 8NA
TROYMAXTM CALCIUM OCTOATE 4
TROYMAXTM CALCIUM OCTOATE 5
TROYMAXTM CALCIUM OCTOATE 6
TROYMAXTM CERIUM 12
Cerium carboxylates promote the polymerization and through-drying processes. Cerium carboxylates are particularly ­recommended for baking enamels and white and clear overprint varnishes, as they produce less discoloration than other active metals.
TROYMAXTM CERIUM 6
TROYMAXTM COBALT 10
TROYMAXTM COBALT 12
Cobalt carboxylates are the most effective oxidative catalysts at ambient temperatures. Cobalt driers produce fast surface dry to the film. They also are effective as accelerators for peroxide-initiated polyesters and epoxies.
TROYMAXTM COBALT 6
TROYMAXTM COBALT 8
TROYMAXTM MANGANESE 10
TROYMAXTM MANGANESE 10PC
TROYMAXTM MANGANESE 12
Manganese carboxylates improve the surface drying of a paint film and also possess some through-drying properties. They are frequently used as polymerization accelerators in baking finishes and low-temperature drying systems.
TROYMAXTM MANGANESE 6
TROYMAXTM MANGANESE 9
TROYMAXTM POTASSIUM 15
Potassium carboxylates work synergistically with Cobalt in unsaturated polyester thermo-set systems.
TROYMAXTM STRONTIUM 10
Strontium carboxylates improve through-drying under adverse conditions, such as high humidity and low temperatures
TROYMAXTM ZINC 10
TROYMAXTM ZINC 12
TROYMAXTM ZINC 16
Zinc carboxylates demonstrate anti-oxidant properties. They are used as additives to retard the thermal breakdown of lubricating oils and greases. Zinc carboxylates keep auto-oxidative films open, thus permitting hardening throughout. Zinc carboxylates are very effective wetting/pigment-dispersing agents and have the added property of inhibiting
TROYMAXTM ZINC 8
TROYMAXTM ZIRCONIUM 10
TROYMAXTM ZIRCONIUM 12
TROYMAXTM ZIRCONIUM 18
TROYMAXTM ZIRCONIUM 24
Zirconium carboxylates improve the through-dry of auto-oxidative drying systems. They are used in combination with Cobalt and Calcium carboxylates. They are preferentially used as replacements for Lead. Zirconium carboxylates are also utilized as polymerization catalysts.
TROYMAXTM ZIRCONIUM 6


Anti Skinning Agents

TROYMAXTM ANTISKIN B
Troymax™ Anti-SkinB is a water-white to pale straw colored mobile liquid. Troymax™ Anti-SkinB prevents skin formation on storage of paints, inks, varnishes, and pigment dispersions based on vehicles which dry by air-initiated oxidation.
TROYMAXTM ANTISKIN OL
Troymax™ Anti-SkinOL is pale yellow liquid, phenolic type of low volatility anti-oxidant. It prevents skin formation on storage of paints, inks, varnishes, and pigment dispersions. It is particularly indicated in applications where its low odor and low volatility are advantageous and where oxime-type anti-oxidants are not sufficiently potent
TROYMAXTM B530
Stabilized mixture of metal carboxylates in a mineral spirits medium


Naphthenate

TROYCHEMTM CALCIUM 4
Calcium carboxylates are very useful when used in combination with active driers such as Cobalt and Manganese. Calcium driers help to improve hardness and gloss as well as to reduce skin-formation, silking, and blooming. They are also useful as pigment wetting/dispersing agents and loss-of-dry inhibitors.
TROYCHEMTM COBALT 6
Cobalt carboxylates are the most effective oxidative catalysts at ambient temperatures. Cobalt driers produce fast surface dry to the film. They also are effective as accelerators for peroxide-initiated polyesters and epoxies.
TROYCHEMTM COPPER 8
Copper carboxylates possess some catalytic activity in polyesters and epoxy systems, but the principal use of copper ­metal-soaps is for fungicidal control.
TROYCHEMTM IRON 6
Iron carboxylates are primarily used in dark baking enamels where maximum hardness is required. Normally, it only becomes catalytically active at temperatures over 130°C.
TROYCHEMTM LANTHANUM 4
Lanthanum carboxylates promote the polymerization and through-drying processes. These types of driers are particularly recommended for baking enamels and white and clear overprint varnishes, as they produce the least discoloration of all active metals. They are especially useful for alkyd and epoxy resins or combinations of both with amine resins.
TROYCHEMTM MANGANESE 6
Manganese carboxylates improve the surface drying of a paint film and also possess some through-drying properties. They are frequently used as polymerization accelerators in baking finishes and low-temperature drying systems.
TROYCHEMTM ZINC 10LV
Zinc carboxylates demonstrate anti-oxidant properties. They are used as additives to retard the thermal breakdown of lubricating oils and greases. Zinc carboxylates keep auto-oxidative films open, thus permitting hardening throughout. Zinc carboxylates are very effective wetting/pigment-dispersing agents and have the added property of inhibiting
TROYCHEMTM ZINC 8


Loss of Dry Inhibitor

TROYMAXTM PERMA DRY
Troymax™ PermaDry is a lead-free loss-of-dry and gel-time drift inhibitor. It maintains its efficacy in coatings and inks containing high surface-area pigments such as carbon blacks, organic reds and colloidal silicas. Troymax™ Permadry is a cost-effective replacement for Cobalt 21% feeder pastes.


Water Dispersible

TROYCHEMTM CALCIUM 6WD
Calcium carboxylates are very useful when used in combination with active driers such as Cobalt and Manganese. Calcium driers help to improve hardness and gloss as well as to reduce skin-formation, silking, and blooming. They are also useful as pigment wetting/dispersing agents and loss-of-dry inhibitors.
TROYCHEMTM COBALT 6WD
Cobalt carboxylates are the most effective oxidative catalysts at ambient temperatures. Cobalt driers produce fast surface dry to the film. They also are effective as accelerators for peroxide-initiated polyesters and epoxies.
TROYCHEMTM MANGANESE 6WD
Manganese carboxylates improve the surface drying of a paint film and also possess some through-drying properties. They are frequently used as polymerization accelerators in baking finishes and low-temperature drying systems.
TROYCHEMTM ZIRCONIUM 12WD
Zirconium carboxylates improve the through-dry of auto-oxidative drying systems. They are used in combination with Cobalt and Calcium carboxylates. They are preferentially used as replacements for Lead. Zirconium carboxylates are also utilized as polymerization catalysts.
TROYMAXTM LITHIUM 2
Lithium carboxylates promote through-drying. They are often used in High Solids coatings and water-dispersible alkyds. They do not lose their effectiveness even in cool environments.


Non-Metallic Driers

TROYMAXTM 250
Troymax™ 250 is an effective non-metallic drier accelerator. It is often used in conjunction with primary driers such as cobalt and manganese.


Drier Blends

TROYMAXTM 123
Troymax™ 123 is a ready-for-use pre-complexed mix of different metals. It is used as a drier for air initiated auto oxidative drying coatings.
TROYMAXTM 2002
Troymax™ 2002 is a ready-for-use pre-complexed mix of metal carboxylates. Usually, Troymax™ 2002 does not require the addition of anti-skinning agent.
TROYMAXTM BXPB
Troymax™ BXPB is a stabilized, lead-free blend of driers that emulates the drying actions of lead in a broad range of systems that require the hard/durable finish provided by lead.
TROYMAXTM CZ69
Troymax™ CZ69 is a cobalt-zirconium drier complex designed to promote the air-drying properties of coatings and inks based on oxidizing vehicles. This combination of metals insures good surface and through-drying properties with the addition of a single drier. Compatibility and stability are excellent with a wide range of vehicle types


Polyester Accelerators

TROYMAXTM 559
Troymax™ 559 is a lead-free loss-of-dry and gel-time-drift inhibitor. It maintains drying efficiency in oxidizing paints and printing inks containing high surface area pigments, such as carbon blacks, organic reds and colloidal silicas.
TROYMAXTM PERMADRY
Troymax™ PermaDry is a lead-free loss-of-dry and gel-time drift inhibitor. It maintains its efficacy in coatings and inks containing high surface-area pigments such as carbon blacks, organic reds and colloidal silicas. Troymax™ Permadry is a cost-effective replacement for Cobalt 21% feeder pastes.


Stearates

TROYMAXTM 858
Troymax™ 858 is a zinc carboxylate from stearic acid. It is usually employed as a stir-in lubricating agent for varnish and lacquer sanding/sealer type systems.


Testing Kits

B-F INDICATORS
B-F Indicators are practical tools for determining the presence of a variety of destructive microorganisms common to manufacturing environments. Left unchecked, these microorganisms can negatively affect the properties, performance, and overall quality of finished products and shorten expected shelf-life.
CM TESTER
The CM Tester procedure is fast, accurate, and has been validated in use by numerous engineers throughout the world. The CM moisture test can be conveniently used right at the test site and results are available in only a few minutes time. CM TESTER units contain all equipment and reagents needed for moisture determination.


New Products

BACILLAT™
BAKZID™
BODOXIN™
CINON™
CLEANGUARD™
EBOTEC
FUNGITROL
FUNGITROL 1075
FUNGITROL 11
FUNGITROL 11-50 S
FUNGITROL 400G FUNGICIDE
FUNGITROL 400S
FUNGITROL 420S
FUNGITROL 430S
FUNGITROL 440S
FUNGITROL 720
FUNGITROL 730
FUNGITROL 740
FUNGITROL 920
FUNGITROL C
FUNGITROL IP 24 FUNGICIDE
NUOSEPT
NUOSEPT 101
NUOSEPT 220
NUOSEPT 44
NUOSEPT 485
NUOSEPT 515CA
NUOSEPT 91
NUOSEPT 95
PLASTIGUARD™
TROY CORPORATION


e-Chemicals.com


Chemical Suppliers

Policy & Agreement | Privacy Policy © 2000-2017 ChemBuyersGuide.com All rights reserved